Paint Protection Film (PPF) Warranty

We stand behind both our craftsmanship and the premium film products we install. Every Paint Protection Film installation is backed by the following coverage:

2-Year Installation Warranty (Workmanship)

Our 2-year installation warranty covers defects related to the application of the film.

Covered under this warranty:

• Adhesion failure caused by improper installation

• Premature edge lifting not caused by impact or washing abuse

• Installation-related contamination visible from normal viewing distance

• Improper alignment or excessive stretch marks due to installer error

• Bubbles that do not settle after the standard curing period

If any of the above occur within two years due to workmanship, we will repair or replace the affected section at no cost.

10-Year Manufacturer’s Warranty (Material Coverage)

The Paint Protection Film we install is backed by a 10-year manufacturer warranty covering material defects.

Covered under manufacturer warranty:

• Yellowing

• Cracking

• Delamination (layer separation)

• Loss of gloss due to material defect

• Adhesive failure caused by film defect

Material-related defects will be repaired or replaced in accordance with manufacturer guidelines.

PPF Finish & Contamination Standards

Paint Protection Film is installed in a clean, controlled environment — however, it is not applied in a laboratory clean room. Because PPF is optically clear and applied directly to painted surfaces, minor installation characteristics may be present.

✔ Acceptable (Industry Standard)

• Minor dust particles not visible from 3–5 feet

• Very small specks only noticeable within 12 inches

• Slight edge visibility where film terminates

• Minor texture consistent with factory paint texture

• Minimal moisture or micro-bubbles during curing (typically resolve within 1–3 weeks)

These conditions are considered normal within the PPF industry and do not qualify for reinstallation.

✖ Not Acceptable (Covered Under Warranty)

• Contamination clearly visible from 3–5 feet

• Clustered debris in high-visibility areas

• Excessive stretch marks or distortion

• Lifting caused by improper installation

• Silvering or trapped contamination affecting adhesion

Any issue affecting durability or clearly visible at normal viewing distance will be corrected.

Curing & Inspection Standard

PPF requires a curing period. Minor moisture, haziness, or small bubbles may be visible immediately after installation and typically resolve within 1–3 weeks depending on weather conditions.

All film installations are evaluated at a normal viewing distance of 3–5 feet under natural lighting. Close-up inspection under direct LED lighting or within inches of the surface may reveal minor imperfections considered within industry standard.

Care & Maintenance Requirements

To maintain warranty coverage, proper care is required.

Owner Responsibilities

To keep your 2-year installation and 10-year manufacturer warranty valid, the film must be:

• Hand washed regularly using pH-neutral automotive soap

• Dried with clean microfiber towels

• Kept free from prolonged exposure to bird droppings, bug splatter, tree sap, and road contaminants

• Avoided from automatic brush car washes

• Avoided from high-pressure water directed at edges

We recommend professional detailing and inspection at least once per year.

Not Covered Under Warranty

• Rock chips or impact damage

• Accidents, scrapes, or vandalism

• Improper washing techniques

• Harsh chemicals or abrasive cleaning tools

• Neglect leading to staining

• Damage caused by aftermarket modifications

Damage caused by improper care or external impact is not considered a defect in materials or workmanship.